Pressure Washing Price Calculator
Enter the surfaces and square footage for a job to get a starting price range. Add several surfaces (say, a house wash plus the driveway) to price a whole job.
A 2-car driveway is about 400–600 sq ft
Suggested price range
$150 – $201
Middle of the range: $176
How the calculator works
It multiplies your square footage by the low and high end of published per-square-foot rates for each surface, then applies a condition adjustment, adds oil stain treatments, and makes sure the total isn't below your job minimum.
| Surface | Low $/sq ft | High $/sq ft |
|---|---|---|
| House wash: vinyl siding (soft wash) | $0.12 | $0.35 |
| House wash: stucco | $0.18 | $0.40 |
| Concrete: driveway, patio, sidewalk | $0.15 | $0.35 |
| Wood or composite deck | $0.30 | $0.60 |
| Fence: wood (per sq ft of face) | $0.30 | $0.55 |
| Fence: vinyl | $0.20 | $0.40 |
| Roof soft wash | $0.30 | $0.75 |
- Condition adjustment (our own rule of thumb, not from a source): moderate +15%, heavy +30%.
- Oil stains: $25–$75 per stain treatment.
- Job minimum: many operators set a minimum of $150–$350 so small jobs still cover drive time and setup. The default here is $150.
Before you send a quote
- Check your local market. Rates vary a lot by region. Call or look up two or three local companies and see where they land.
- Price for risk and access. Second stories, steep roofs, delicate surfaces and long drives belong at the top of the range or above it.
- Watch your hourly rate. Estimate how long the job takes. If the price works out below what you need per hour, raise it.
Want the full breakdown? Read how much to charge for pressure washing.
Sources
Rates compiled from published 2026 pricing guides, including Zarla, Housecall Pro, MakeWash, BillBooks, LawnGuru and Crewnest. Where sources disagreed we used the range most of them shared. Results are estimates, not a guarantee of what customers will pay.