How Much to Charge for Pressure Washing: 2026 Price Guide

By Cole Barrett ยท Updated 2026-11-15 ยท How we research

Most residential pressure washing is priced per square foot, with a job minimum so small jobs still pay for your drive and setup time. Below are the typical ranges published for 2026, how to use them, and the mistakes that make new operators underprice.

Want a number now? Use the free pressure washing price calculator. It uses the same rates as this guide.

Typical 2026 rates by surface

Surface Typical $/sq ft Example job
Concrete: driveway, patio, sidewalk $0.15โ€“$0.35 2-car driveway (400โ€“600 sq ft): roughly $100โ€“$300
Vinyl siding house wash (soft wash) $0.12โ€“$0.35 2,000 sq ft of siding: about $240โ€“$700
Stucco $0.18โ€“$0.40 Higher than vinyl: more absorbent, slower to clean
Wood or composite deck $0.30โ€“$0.60 300 sq ft deck: about $90โ€“$180, often higher with stain removal
Wood fence $0.30โ€“$0.55 Some contractors price fences per linear foot instead
Vinyl fence $0.20โ€“$0.40
Roof soft wash $0.30โ€“$0.75 Highest risk and chemical cost, so price at the top for steep roofs

Ranges are compiled from published 2026 pricing guides, which differ from one another: Zarla, Housecall Pro, MakeWash, BillBooks, LawnGuru and Crewnest. For whole jobs, many homeowners pay roughly $150โ€“$500, and a two-story house wash commonly lands around $300โ€“$500.

Job minimums

Set a minimum charge and stick to it. Published minimums commonly run $150โ€“$350. Without one, a "quick" $60 patio job can cost you money once you count driving, setup, cleanup and fuel.

Add-ons that raise the ticket

  • Oil stain treatment: about $25โ€“$75 per stain
  • Concrete sealing: about $0.50โ€“$1.00 per sq ft
  • Gutter brightening, window rinsing, fence or deck add-ons when you're already on site

Offering two or three add-ons on every quote is the easiest way to raise your average job.

How to adjust for your market

  1. Check local competitors. Look up three local companies' prices or ask for quotes. Rates vary a lot by region and cost of living.
  2. Adjust for condition. Heavy algae, years of grime or deep stains take longer. Our calculator adds 15% for moderate and 30% for heavy buildup. That's our own rule of thumb, so adjust it to your experience.
  3. Adjust for access and risk. Second and third stories, steep roofs, delicate surfaces and tight access belong at the top of the range or above it.
  4. Check your hourly rate. Estimate how many hours a job takes. Hourly rates for pressure washing are commonly quoted around $50โ€“$100 per hour for basic work (AirQuote). Established operators often target well above that, around $150โ€“$300 per hour of on-site work, once they have efficient equipment.

Common pricing mistakes

  • Pricing only by the hour as a beginner. You're slow at first, so per-square-foot pricing protects you, and you earn more as you get faster.
  • No minimum. Small jobs eat your day.
  • Forgetting chemicals and fuel. Soft wash solution, surfactants and fuel add up.
  • Guessing square footage. Measure, or use satellite views to estimate before you quote.
  • Never raising prices. Review your rates every year.

Quote faster

Once your prices are set, the next bottleneck is getting quotes out quickly and following up. Start with our step-by-step guide to starting a pressure washing business, which covers quoting and invoicing options.

Prices are typical published ranges, not guarantees. Your local market decides what customers will pay.